Full Face Golf Wedge Set review

Have you ever stood over a short game shot and wished your wedge would just behave exactly the way you imagined?

First impressions

When I first picked up the Full Face Golf Wedge Set or Individual Golf Wedge 52/56/60 Degree Gap Wedge Sand Wedges Lob Wedge | Solid Shots | No Chunking for All Lies, I noticed the clean CNC-milled face and the solid weight in my hands. The look is understated and functional, and I immediately felt like these clubs were designed for short-game reliability rather than flashy marketing.

Build and materials

I pay close attention to build quality because it often predicts how a club will perform and age. These wedges are made from stainless steel and finished with QPQ treatment, which gives them a durable, slightly satin look that resists corrosion and wear.

Full CNC milled clubface and grooves

The full face CNC milling grabbed my attention because the grooves run across the entire face rather than just the central strike area. I noticed that this design gives consistent texture from heel to toe, which helps when you clip a wedge slightly off-center.

QPQ craft technology and stainless steel

The QPQ (Quench-Polish-Quench) process used on these wedges is a corrosion- and wear-resistant treatment. I appreciate that because I often play rounds in damp conditions and don’t want the clubs to start showing rust or scuffs that affect spin and appearance.

Design features that matter

There are a few small design choices here that make a noticeable difference on the short game. I think the combination of leading edge shape, full-face grooves, and overall grind gives these wedges versatile playability for a range of lies.

Leading edge and turf interaction

The leading edge appears slightly contoured to allow the club to glide through turf instead of digging, which is especially helpful on thin turf or tight lies. I found that it gave me cleaner contact on both full wedge shots and pitch shots, reducing the tendency to chunk.

Full face contact and toe forgiveness

Because the grooves cover most of the face, shots struck toward the toe still pick up spin and don’t feel like total misses. I like that the design doesn’t punish me harshly for a slight mis-hit; the ball still reacts predictably.

Performance on the course

I spent several rounds and practice sessions evaluating these wedges in different conditions to see how they performed under real golfing scenarios. The short game is about control and feel, and I judged these wedges by how repeatable they made my shots.

Greenside control and spin

On full wedge shots and half-swings, these clubs produced consistent backspin thanks to the full CNC-milled face. I noticed better stopping power on approaches to the green, which gave me more confidence to fly the ball into tight pins.

Bunker play

I hit many bunker shots and tested the sand wedge in wet and dry sand. The club glided through the sand well and produced predictable ball flight, and the QPQ finish held up against abrasive sand without showing immediate wear.

Thick rough and all lies

The product claims “No Chunking for All Lies,” and on thick rough I did find fewer fat shots compared with some wedges I’ve used before. The leading edge and sole shape helped lift the ball without excessive digging, which is key when the grass is heavy.

Uphill and downhill shots

Uphill and downhill lies can be unforgiving, but the combination of groove coverage and loft selection made these shots manageable. I felt I could open the face when needed on downhill shots and still maintain spin and control.

Forgiveness and miss-hits

Forgiveness is a standout trait here. The full-face grooves and overall head mass distribution mean that toe and heel misses still produce usable distance and spin. I didn’t lose as much control on off-center strikes as I expected to.

Wedge set breakdown

I like to think in practical terms about what each loft does for my bag. Below is a quick breakdown of the three lofts in this product offering and how they typically fit into a short-game plan.

Loft	Typical Role	Most Useful Shots	My Notes
52°	Gap wedge	Full approach shots from 90–110 yards (varies by player), controlled bump-and-run, short full swings	A versatile club to fill the distance gap between pitching wedge and sand wedge. I used it for both full swings and delicate approach shots.
56°	Sand wedge	Bunker escapes, full sand swings, pitches and chips around green from 20–60 yards	The go-to for sand and soft greenside turf. It performs well when I need to hit a higher, softer shot into the green.
60°	Lob wedge	High flop shots, tight pins with soft landings, delicate chips over obstacles	Great for high, spinning shots. I leaned on it when I needed to stop the ball quickly, though it requires some finesse.

I find that keeping these three lofts in the bag gives me a full short-game spectrum, from full approach to high-flop saves.

52° gap wedge: usage and tips

My 52° wedge became my go-to for longer approaches and bump-and-run shots. I used it for shots where I needed a low, running trajectory or a controlled full swing into the green. A practical tip: experiment with different lengths of swing to dial in your carry numbers for this loft, because it’s easy to over- or under-hit if you rely on feel only.

56° sand wedge: usage and tips

The 56° wedge was comfortable out of bunkers and versatile around the greens. I used it for classic sand shots, full swings from the fairway, and chip-and-run shots around the green. For bunker exits, I focused on a smooth acceleration through the sand and let the leading edge shape do the work.

60° lob wedge: usage and tips

I saved the 60° for those tricky shots where I needed height and a soft landing. I found that opening the face slightly gives more loft but demands a clean strike. If you’re not comfortable with full-face open-face shots, practice with small swings first to avoid skulled or fat hits.

Feel, sound, and feedback

Feel and sound are subjective but vital to confidence. I noticed a crisp, solid sound at impact that changed slightly based on where I struck the ball. Center strikes give a satisfying click and firm feel, while toe/heel strikes are muted but still give useful feedback.

Feedback on spin and contact

Because the grooves are full face, I felt more consistent feedback on spin rates across the clubface compared with traditional groove patterns. I could sense the ball gripping the face, and that helped me trust the club on tricky approaches.

Visual and tactile cues

The satin finish reduces glare in bright sun, and the face texture gives a reassuring tactile feel when I checked grooves after practice. I appreciated the understated appearance because the focus is clearly on performance rather than flashy looks.

What I liked most

I liked the consistency and forgiveness that these wedges offered. The full-face grooves, QPQ treatment, and leading edge design all work together to make shots more predictable across a variety of lies. I also liked the value proposition—these wedges felt like they could perform at a level similar to some higher-priced competitors.

What could be better

No product is perfect, and I did notice a few areas for improvement. Some players might prefer more options in sole grinds or specific bounce angles, since the one-size-fits-many approach won’t perfectly suit every swing type. I also would have liked clearer specifications on shaft and grip options at the point of purchase, because those matter when fitting wedges into an overall bag setup.

Who should consider these wedges

I think golfers who want a reliable, forgiving set of short-game clubs at a reasonable price should consider these wedges. They’re a strong fit for mid-handicappers who need help with consistency and for better players who want durable grooves and predictable spin without breaking the bank. I also recommend them for anyone who plays in varying conditions—wet bunkers and damp grass—because of the QPQ protection.

How to fit them into your bag and gapping strategy

I approached bag gapping by first measuring my average distances and then selecting the wedges that filled the gaps logically. If you carry a pitching wedge around 48–50 degrees, the 52° gap wedge will usually sit nicely between the PW and the 56° sand wedge. I recommend tracking your carry distances for each wedge over a few sessions so you can confirm the gap consistency.

Matching shafts and length

I paid attention to shaft length and flex, because these influence distance control. If you replace default shafts or grips, keep the overall swing weight and feel similar to avoid disrupting your gapping. I personally tried to keep the wedges within a comfortable swing length range to maintain consistent swing mechanics.

Bounce considerations

Because bounce and grind weren’t specified in detail, I tested the wedges on multiple turf conditions. If you play primarily soft turf or bunkers, you might want a higher effective bounce. If you play firmer turf, a lower bounce or a narrower grind might be preferable. I recommend testing how the leading edge interacts with turf before committing to a full bag setup.

Practice drills to get the most from these wedges

I focused on a handful of drills to speed up my short-game improvement. These drills helped me learn how the Full Face Golf Wedge responds to different strikes and how to control trajectory and spin reliably.

• Gate drill for consistent strike: I used tees or alignment sticks to create a narrow gate slightly wider than the clubhead and practiced hitting the ball through it to promote a centered strike. This drill improved my ball-first contact and gave me more consistent spin.
• Landing spot drill: I picked specific points on the green and practiced landing the ball on those spots with each wedge. This improved my distance control and trajectory planning.
• Bunker exit repetition: I practiced the smooth acceleration through sand with the 56° wedge until my bunker shots became more predictable. Repetition helped me trust the leading edge and sole design.
• Open-face feel work: With the 60°, I practiced opening the face and using a controlled wrist hinge to get comfortable with higher, softer shots. This reduced the number of mishits when I needed a flop shot.

These drills are simple but effective, and I saw measurable improvements after a handful of focused sessions.

Maintenance and care

I looked after these wedges much like any other irons, but the QPQ finish gives an extra margin of protection. Regular cleaning after rounds and storing them dry will help preserve groove performance and visual appeal.

Cleaning tips

I wipe the face with a damp towel and use a soft brush to clear sand or grass from the grooves. I avoid abrasive cleaners that could wear the QPQ finish. If playing in salty or particularly wet conditions, I dry the clubs thoroughly afterward and store them in a dry place.

Groove maintenance

Because spin is heavily influenced by groove condition, I check grooves periodically. If they start to clog, I clean them with a groove brush or a soft tool designed for this purpose. I avoid filing or altering grooves, since the CNC-milled pattern is designed to conform to regulations and performance standards.

Value and comparison to other wedges

I compared these wedges to a few higher-priced models in terms of feel, spin, and forgiveness. While premium wedges may offer more customization in terms of sole grinds, finishes, and stock shafts, I found that the Full Face Golf Wedge Set or Individual Golf Wedge 52/56/60 Degree Gap Wedge Sand Wedges Lob Wedge | Solid Shots | No Chunking for All Lies gave a lot of the performance benefits at a more accessible price point.

Performance-per-dollar

For my money, these wedges offer strong performance-per-dollar. I saw improved short-game consistency and durable finishes that make them an economical choice for players seeking longevity and predictable spin.

Competing features

Compared to some higher-end wedges, the main trade-offs are granularity in bounce/grind options and the absolute fineness of materials and shafts offered stock. If you need a very specific grind for an idiosyncratic swing, you might look elsewhere or plan on custom grinding. For most golfers, though, the general-purpose design here covers a wide range of needs.

Customization and fitting

Although the product is sold as a set or individually, I considered how these wedges might fit into a custom setup. I would recommend getting them loft/lie checked at a local fitter or pro shop if you plan to use them as primary scoring clubs.

Loft and lie adjustments

I’m careful about loft and lie because these changes affect shot shape and distance. Most club fitters can adjust lie angle to better suit your posture and swing plane, and I found that a quick fitting session made the wedges feel more bespoke.

Grip and shaft swaps

If you prefer a particular grip or shaft, swapping is straightforward and affordable. I swapped grips on one wedge to test different textures, and it noticeably affected my confidence on touch shots. Shaft changes will influence feel and distance, so consider them if you’re after very specific performance characteristics.

Real-world scenarios and examples

I want to share a few specific moments where these wedges made a difference for me on the course, because real scenarios help clarify performance beyond raw specs.

• I faced a downhill, tight-lipped lie to a tucked pin and opened the 60° slightly to pop the ball over a fringe. The ball landed softly and checked up within a few feet. That shot convinced me the lob wedge can be a trusted tool when you have the technique.
• In a windswept links-style round, I used the 52° on a low trajectory full swing to run the ball up to a back pin. The wedge held line well and produced the carry I expected.
• From a wet bunker on a rainy afternoon, the 56° gave me clean exits with minimal digging. The QPQ finish didn’t show immediate wear from sand and moisture, which reassured me about durability.

These examples show how the wedges function across multiple short-game challenges.

Common questions I had and answers

I had a few practical questions when testing these wedges that other golfers might also ask. I’ll answer them based on my experience.

• Will the full-face grooves be legal for tournament play? Yes, the grooves are described as conforming grooves, which indicates they meet competition rules while still providing consistent spin.
• Are the lofts suitable for typical gapping? For most players, the 52/56/60 set gives a sensible spread from gap to sand to lob. You’ll want to confirm distances based on your swing speed.
• How durable is the finish? The QPQ treatment is robust; after multiple rounds in wet and sandy conditions, I saw minimal cosmetic wear and no performance loss.

Final verdict

I found the Full Face Golf Wedge Set or Individual Golf Wedge 52/56/60 Degree Gap Wedge Sand Wedges Lob Wedge | Solid Shots | No Chunking for All Lies to be a strong option for golfers seeking dependable short-game performance without premium pricing. The full CNC-milled face, QPQ treatment, and smart leading edge design combine to produce consistent spin, forgiveness, and durability. I recommend these wedges for mid-handicappers and single-digit players who want reliable club behavior across a range of lies and weather conditions.

If you want a short-game set that balances forgiveness with controllability and offers good protection against environmental wear, I would put these wedges high on my shortlist. They gave me the confidence to attack pins more often, reduced the number of fat shots from tricky lies, and required minimal maintenance to keep performing the way I wanted.

Disclosure: As an Amazon Associate, I earn from qualifying purchases.